4 and 5-Stage High Pressure Breathing Air Compressors

ENGINE DRIVEN

H25-D Diesel Engine Drive

H10-D Diesel Engine Drive

Pressure
up to 6000 psig
up to 414 bar

Charging Rate
13 to 60 scfm
368 to 1700 l/min

Power
13.5 to 60 hp
10 to 45 kW

The ENGINE DRIVEN compressor for recharging SCBA or SCUBA cylinders combines compressor, purification system and engine drive.
The frame’s rugged design is specific to the requirements of the engine drive/compressor block assembly.

STANDARD SCOPE OF SUPPLY

BAUER breathing air purification system

BAUER PLC based controller with four line text display

NEMA 4 rated electrical enclosure with UL® listed control panel with hourmeter

Compressor low oil pressure and high temperature safety shutdowns

Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch.

Automatic “Full” indication and compressor shutdown

Interstage pressure gauges

Electric start package including electric clutch and speed control solenoid

AVAILABLE ACCESSORIES (factory installed)

Audible alarms for safety shutdowns

CO monitor

Other accessories available on request

Diesel Drive Models

Closed loop water cooled diesel

WEIGHT pounds (kg)

1300 – 3750 (590 – 1700)

1) Based on recharging an 80 cubic foot tank from 500 to 3000 psig.
2) Compressor capacity referenced to standard inlet conditions.

G = Gasoline engine drive
D = Diesel engine drive Alternate drives available.

Dimensions and weight are approximate and are subject to change.